Indesit D61D dishwasher keeps tripping house electrics and has no water going in?
Tuesday, November 25th, 2008 at
3:03 pm
Alison S asked:
I have an Indesit D61D that is consistently tripping the RCD breaker in my house when it gets a couple of minutes into any cycle. When you start a cycle it sort of chugs and whirs like it is trying to go but no water goes in and it either stays like that or trips the electrics. Cleaned out the bottom filter bit but no joy. I am rubbish at stuff like this, can anyone help please?!
Many thanks, Alison (& Co!)
Tagged with: Dishwasher • Many Thanks • Rubbish
Filed under: Maintenance & Repairs
Like this post? Subscribe to my RSS feed and get loads more!
brighton electrical
When something makes a noise it is most probably jammed somewhere. If you are not very good at repairing something rather not take it apart. The only thing that I would do is to check the pipes and the pump. Maybe something is stuck in the pump. If you can take it to an honest reapirman he might find something stuck inside and clear it.
To find the pipes you remove the back cover and you will see a pipe from the tap to something that is connected to the electrical system, that should be the pump. If it has a circular part on the pump with a few screws you can take that off with the water and power off and see if there is an obstruction. Then take the pipe off from the pump and have a look down it. If there is a drain pipe and pump check that pump as well.
sussex electrician
consult professional help this is not a quick fix and may even be a faulty unit